Sourcing Guides
wholesale optical frames acetate optical frames wholesale tortoiseshell acetate frames cellulose acetate spectacle frames hand-finished acetate eyeglasses rectangle acetate optical frames square acetate optical frames titanium optical frames wholesale Global Service Top SearchCompany
About Elistro Dealer Program ContactTested rigorously under mechanical stress, nickel-release thresholds (EN 16128), and dimensional stability standards to assure zero fitting variance for high-volume lab glazing.
For optical chains, distributors, and certified optometrists operating across the European Union, North America, and Australasia, CE conformity is not merely a bureaucratic checkbox—it is a rigorous, legally binding medical device assurance. Under Regulation (EU) 2017/745 (Medical Device Regulation - MDR), non-corrective spectacle frames intended to house ophthalmic prescription lenses are classified as Class I Medical Devices. Factory compliance requires thorough adherence to the harmonized standard EN ISO 12870:2018 (Ophthalmic optics — Spectacle frames — Requirements and test methods).
As an export-oriented industrial eyewear manufacturer, our manufacturing lines integrate verifiable compliance checkpoints across every phase of fabrication. Procurement directors must assess whether an OEM exporter’s Declaration of Conformity (DoC) is backstopped by independent, accredited laboratory testing covering four vital structural and chemical metrics:
Direct skin-contact metal alloys must release less than 0.5 μg/cm²/week of nickel over two years of simulated wear, verified via chemical digestion to safeguard wearers against severe contact dermatitis.
Frames undergo cyclic spring and standard hinge tests comprising 20,000 continuous opening and closing articulations at a frequency of 0.5 to 1.0 Hz with zero post-test structural fatigue, warping, or screw backing.
Subjection to 60°C dry heating followed by high-humidity environmental chambers ensures cellulose acetate and memory polymers do not craze, delaminate, oxidize, or suffer bridge pitch migration.
Failure to import fully documented spectacle frames exposes distributors to border seizures, RAPEX recall alerts, and catastrophic product liability. Elistro Eyewear guarantees complete technical documentation dossiers, including biocompatibility evaluations under ISO 10993 (Cytotoxicity, Sensitization, and Irritation testing), ensuring seamless customs clearance into Frankfurt, Rotterdam, Felixstowe, and Long Beach ports.
Optician chair-side fitting success depends heavily on the metallurgical and polymer behavior of the optical frame chassis. When opticians heat a bridge to adjust face wrap or temple splay, sub-par recycled materials will blister or loose tensile retention. In our manufacturing facilities, raw material integrity is engineered around the specific demands of wholesale optical dispensing.
| Substrate Material | Specific Gravity | Tensile Yield (MPa) | Corrosion Immunity | Key Optician Dispensing Advantage |
|---|---|---|---|---|
| Mazzucchelli Cellulose Acetate | 1.28 - 1.32 g/cm³ | 45 - 85 | Total (Organic Polymer) | Superior thermoplast memory; allows deep custom ear-curve setting without stress-cracking. |
| Beta-Titanium (β-Ti alloy) | 4.50 g/cm³ | 850 - 1050 | Extreme (Immune to sweat/salts) | Hyper-spring elasticity; ideal for featherweight, screwless, or rimless minimalist designs. |
| AISI 316L Surgical Stainless Steel | 7.95 g/cm³ | 290 - 450 | High (Electropolished passivation) | High tensile rigidity allowing ultra-thin, durable eyewires for complex high-minus prescriptions. |
| Grilamid TR90 (Swiss Polymer) | 1.01 g/cm³ | 60 - 80 | Absolute Chemical Resistance | Extreme flexural recovery; featherlight wear profile ideal for sports, active, and youth sectors. |
True value in optical wholesale lies in microscopic tolerances. High-volume automated lab glazing centers require rim bevel depth tolerances strictly maintained within ±0.05 mm to prevent lens fall-out or edge chipping under lens stress.
Each acetate frame front begins as a slab of cured organic cotton flake polymer, precision CNC routed across five dynamic axes. The components undergo 72 hours of proprietary four-stage barrel tumbling using specialized birch pegs, crushed walnut shells, and graded pumice slurry. From coarse deburring to fine liquid wax buffering, this cycle produces a mirror-grade luster that will never yellow or cloud under retail showcase halide or LED lighting.
Optical supply chain directors and enterprise category buyers must position their inventories ahead of structural industry shifts. The global spectacle frame market is moving away from low-cost, disposable injection plastics toward circular sustainability, dynamic demographic adaptation, and smart technology hybridization.
By 2027, major Western optical chains will mandate a minimum 40% bio-based plasticizer content. Our factories are actively deploying phthalate-free, certified biodegradable acetate derived from renewable wood pulp, fully certified under the International Sustainability and Carbon Certification (ISCC PLUS).
Demographic diversification in domestic markets demands wider pantoscopic tilt options, lower apex bridge heights, and variable nose pad placements. Modern assortments combine classic European bridge geometries with specialized Asian-fit configurations to capture broad consumer bases without excess inventory SKU counts.
The boundary between medical corrective frames and digital wearables is disappearing. Advanced OEM designs integrate micro-milled temple cores capable of housing bone-conduction audio transducers, gesture sensors, and blue-light filtration without distorting optical centering or weighing down the wearer's ears.
Unlike trading intermediaries that mark up prices and lack quality control oversight, our integrated manufacturing infrastructure bridges the gap between high-end design houses and cost-efficient industrial production. Based on the proven craftsmanship legacy of Elistro Eyewear, our B2B dealer and wholesale program offers unparalleled structural support for growing retail and wholesale operations:
We eliminate inventory deadweight. Rather than drowning buyers in thousands of unvetted options, our collection focuses on 13 high-velocity silhouettes spanning 65 commercially proven colorways with immediate multi-regional sell-through appeal.
Every optical frame can be delivered counter-ready with five branded pieces: custom rigid protective frame case, gift presentation box, microfiber cleaning cloth, authenticity warranty card, and store carrier bag—eliminating secondary packaging procurement costs.
No guesswork for your opticians. Every frame is laser-inscribed with standardized international sizing measurements (Lens Width □ Bridge Width - Temple Length, e.g., 53□19-145 mm), full pantoscopic angle tolerances, and material grade declarations.
Every commercial order is supplied with an official Manufacturer Declaration of Conformity (DoC) declaring adherence to Regulation (EU) 2017/745 (MDR Class I) and harmonized standards EN ISO 12870:2018. In addition, full accredited third-party laboratory test reports (covering EN 16128 Nickel release, dimensional stability, mechanical hinge cycles, and ignition resistance) are archived and accessible via our digital client portal.
For existing warehouse SKUs under our active catalog, we offer ultra-flexible low MOQs of 50 to 100 units across mixed styles to help independent optical shops and boutique practices manage initial cash flow. For custom OEM/ODM brand manufacturing requiring custom pantone acetate extrusions, custom hinge castings, or private label tooling, the baseline MOQ is 300 units per colorway.
All frame eyewires are precision cut using automated CNC millers programmed to an exact 115-degree V-groove standard with a consistent depth of 0.60 mm (±0.03 mm tolerance). This guarantees that industrial edging labs using Essilor, Nidek, or Briot equipment can achieve clean lens trace and clip-in without requiring manual rim-stretching or hand trimming.
Yes. In addition to our standard branded wholesale lines, our packaging design facility produces turnkey private-label sets. This includes customized debossed PU or genuine leather cases, foil-stamped outer gift boxes, custom-printed high-density microfiber cloths (220 GSM), and barcoded product cards integrated with your proprietary SKU inventory system.
Our quality control department enforces a strict Acceptable Quality Limit (AQL) 1.0 Major / 2.5 Minor inspection protocol. Every individual frame undergoes four manual checkpoints: raw acetate profile inspection, temple tension calibration, bridge plane horizontal alignment on granite surface tables, and microscopic cosmetic scratch audits under high-lux illumination prior to ultrasonic cleaning and final packaging.
Our distribution infrastructure ships worldwide via bonded air and sea freight forwarders. Our high-frequency distribution networks serve major optical retail chains, wholesale cooperatives, and healthcare dispensaries across Germany, the UK, France, Italy, the United States, Canada, India, Nepal, Sri Lanka, and the UAE with complete DDP, CIF, or FOB trade terms.
Partner directly with a certified ophthalmic frame exporter. Request our comprehensive commercial wholesale price catalog, evaluate material swatches, and review our full compliance technical file.
